jit-s-build
|
jit-s-build [2012/11/05 13:03] jit |
jit-s-build [2012/11/05 17:58] (current) jit |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| **jit's build** | **jit's build** | ||
| - | This is documentation of the building of a Bukobot 8 Duo kit. This model has two extruders and a heated bed. The single-extruder version of the x carriage is also shown. | + | This is documentation of the building of a Bukobot 8 Duo kit. This model has two extruders and a heated bed. The single-extruder version of the x carriage is also shown. Nearly everything here should apply equally well to the smaller versions of the Bukobot. |
| Some photos show printed parts lists. These are based on an early version of the Bill of Materials (BOM), and may not exactly match your kit. | Some photos show printed parts lists. These are based on an early version of the Bill of Materials (BOM), and may not exactly match your kit. | ||
| - | The background grid in some photos is a 1 cm grid. | + | The background grid seen in some photos is a 1 cm grid. |
| - | + | ||
| - | {{wiki:jitsbuild:x_left_kit.png}} | + | |
| - | The printed plastic part shown in this image has a significant overhang in the large circular opening. This printing technology cannot produce a sharp clean profile with this kind of overhang, so the part must be trimmed before you attach parts to it. See [[Cleaning up printed parts]]. | + | [[jitsbuild-x-carriage|X carriage]] |
| + | [[jitsbuild-x-leftend|X left end]] | ||
| + | |||
| + | |||
| + | |||
| + | //The contents of this page may be re-used under any of the following licenses: The [[http://creativecommons.org/licenses/by-sa/3.0/|Creative Commons Attribution-ShareAlike 3.0 Unported License (CC BY-SA 3.0)]], or the [[http://www.gnu.org/copyleft/fdl.html|GNU Free Documentation License (GFDL, version 1.2 or later)]].// | ||
jit-s-build.1352142182.txt.gz · Last modified: 2012/11/05 13:03 by jit
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
